 Sand Art Picture Glass Liquid Painting 3D Natural Landscape showpieces for Home Decor Antique Gifts for Kids Office Desktop Decoration Desk Table Decorative Items.
A world of sand with thousands of changes
- The product has a round appearance. Through different placement and rotation, different beautiful scenery will be produced. The circular design makes it unique. It not only has a modern sens.
- if you turn it over to the correct position and arrange the bubbles evenly on the object, the sand will slowly sink from one or two gaps in the bubbles and can continue within a few hours.
- Sand falling slowly can help us relieve stress, relax our eyes and increase patience, which can effectively relieve emotions.
- Each flip can produce a different landscape. Conducive to the development of intelligence and improve mood.
- The glass frame is very transparent and crystal clear. Suitable for decoration of living room and bedroom.
- Acrylic base: The acrylic material is delicate and thick, which can be placed anywhere, such as hotels, restaurants, bars, dance halls, bedrooms, offices and studies.
- The mixed flow of liquid makes every circle flow smoothly. It is placed on the table, rotated, and placed horizontally like a photo frame.
- Please pay attention to the majestic mountains, desert dunes, deep oceans, and distant stars!
- ASOMA Moving Sand Art Picture Glass Liquid Painting 3D Natural Landscape showpieces for Home Decor Antique Gifts for Kids Office Desktop Decoration Desk Table Decorative Items.
3D Natural Landscape showpieces for Home Decor Antique Gifts for Kids Office Desktop Decoration Desk Table Decorative Items.
Air bubbles are what control the flow of sand. You can move the frame strategically to make the bubbles move, and only let a little bit of sand through at a time. Or just move the bubbles to one side and let all the sand go through at once.
If many small air bubbles in the mobile sand art decoration have become large air bubbles, you can add a little water to supplement the evaporation of water.
1.- Be sure to use pure water or boiled water for cooling;
2. Select a vent, wait for the sand to come out, draw out some air, and clear the air duct.
3. Then use the air conditioner to pump water, add too much water to prevent excessive pressure and broken glass.
Special Notice:
There are strict initial standards for the amount of air in sand paintings. Water will evaporate, because there is no absolutely airtight environment for this handmade product. Over time, the air inside may increase. In the hot summer, water will evaporate faster. At this time, the amount of air may need to be adjusted. This is easy to handle. You need a syringe with a thin needle and some clean water. A disposable syringe is sufficient. There is a small hole on the side of the rubber ring. Find the small hole and let the air come up and the sand sink. Insert the syringe into the rubber to adjust the water and air. The number of bubbles will directly affect the speed of the quicksand. The more air, the slower the flow rate. And the less air, the faster the flow rate. The most important thing is that the amount of water injected is the same as the amount of air extracted. In addition, please do not do this too many times, as this may damage the air tightness of the rubber.
Instructions for use :-
- Place the sand painting on a shelf for at least 30 minutes.
- When you operate it, just hold and shake it gently left and right for a while, so that the air bubbles inside become small bubbles, then turn it over to let the sand slowly flow down from the small bubbles.Note: It is normal for some bubbles to get stuck.Because the buoyancy of the bubbles is balanced with the gravity of the sand, but the situation rarely happens.
- After the sand has completely fallen, keep it on the shelf for at least 30 minutes, then turn it over.
Reviews
There are no reviews yet.